Petzl Falcon harnesses have been designed to meet the requirements of rescue professionals involved in mountain rescue and technical rope rescue, for example.
The Petzl Falcon waist belt and leg loop configuration has been designed to improve comfort while walking whilst being lightweight and comfortable.
Three attachment points are provided on the Petzl Falcon, a ventral point for work in suspension and lateral points for work positioning.
All Petzl FALCON harnesses have a rear buckle which allows a chest harness to be attached when winching a load up to a helicopter or for ascending a rope, for example.
All Petzl FALCON harnesses
are equipped to maximize functionality for rescue professionals: multiple attachment points, soft or rigid tool
holders, slots for Petzl CARITOOL tool holder.
||Leg loop size
Please note that the (required) Omni Lock karabiner shown in the above image is an optional extra.
- Waistbelt and suspension seat lined with breathable
perforated foam for maximum comfort
- Two-part ventral attachment point increases the
efficiency of rope ascents when using a Petzl CROLL
- Textile lateral attachment points for occasional use
- Rear attachment buckle for connecting a Petzl CROLL
ventral rope clamp using a SECUR shoulder strap or
a Petzl TOP CROLL chest harness
- Waistbelt and leg loops equipped with two selflocking
- Four equipment loops:
Two large rigid ones in front for easy access to gear and two small flexible ones at the back that will not interfere with wearing a backpack
- Two slots for Petzl CARITOOL tool holder
"This harness is ideal for IRATA level 3 technicians who are rigging ropes, lead climbing, and taking on a more
supervisory role. When used in conjunction with the Petzl Top Croll the lower
attachment point on the front of the harness allows sevral inches extra progression for each step of ascent. This feature offers faster and less time consuming long ascents.
The reduced bulk of this harness makes lead climbing far less restrictive when compared with standard access harnesses."
Conformance: EN358, EN813